Our new software enables easy configuration of our Prisma TFT controller boards according to your requirements. Two versions are available:

• MStarRover for PrismaMediaECO-II
• MarsRover for PrismaMOBILITY-II
• ChandlerRover for PrismaECO-IV

The software enables configuring the following board features:

• LVDS timing (with spread spectrum for increased EMI performance)
• Power Sequencing (T-CON, BLU, PSU remote signal on screw terminal)
• T-CON supply voltage is configurable for 3.3V / 5.0V or 12V
• Backlight unit (BLU) control (ANA/PWM, 3.3V/5V min/max, with pixel dimming)
• Adjustable LVDS option pins (e.g. for reverse scan, JEIDA/VESA mapping, H/L, 3.3V or 5V level)
• Configuration can be saved as XML file for future use
• OSD setup and user data can be saved and re-used
• Firmware and EDID can be updated easily
• Operation hour counter (analyzable separately for display and backlight)
• The user can chose the active input interfaces (for shorter switching periods when searching for an input source)