Prisma-IIIE

Our Prisma-IIIE provides top performance for all applications and a wide temperature range. It is 100% mechanically compatible to its popular predecessor versions Prisma-II and Prisma-III and provides the following interface inputs:

• RGB analog (VGA); optional Sync on Green (SOG)
• DVI (HDMI 1.4/HDCP)
• additional DVI input at internal AUX
• Up to 8 Composite Video inputs
• Up to 8 S-Video inputs
• Up to 4 CVBS inputs
• Component Video/YPbPr
• RGB-CS (internal connector); optional Sync on Green (SOG)

Special features:

• Integrated operating hours counter for power-on and display-on
• User defined configuration of each input interface, unused inputs can be disabled for a more clear-cut menu
• Powerful Picture-in-picture (PIP) and Picture-and-Picture (PAP) functionalities
• Serial interface (RS-232) for remote OSD functionality (full command set indentical to integrated OSD menu)
• Remote – control via DDC (VESA, DVI)
• Integrated DICOM Preset – functionality    
• Analog RGB Sync On Green Capable (15.75 to 68KHz Legacy Timings) for CRT replacement
• RS170 and RS343 Video Input Option (15.75 to 68KHz Legacy Timings) for CRT replacement
• Tiling for video /split walls (16x16)
• Via board configuration, a 4 or 6 button keypad use can be selected. Thus the customer can preset the keypad he wants to use or change the keypad without needing a custom firmware.
• Implementation of NTSC as a digital DVI signal with scaling up to WUXGA (1920x1200)
• For VGA input, Sync-On-Green can be activated for more flexibility in dealing with a wide variety of video signals
• 2 individual video modes can be defined so that no custom firmware is needed for the customer’s special video modes.
• The output TFT frame rate can be adjusted with MarsRover. The customer can set a fixed output frame rate or range, thus optimizing the conversion of input and output frame rate. This avoids artifacts and jerking of the content.
• Power supply: Vcc + 12V, optional version with Vcc= + 24V
• DDC/CI functions
• Modern EMI design: EN55022 class A without housing
• VGA/DVI/HDMI/CVBS/SVideo  bridge

Options:

• Ambient Light Sensor for automatic brightness control (I²C)
• Stepwise definition of backlight brightness in relation to ambient brightness via the OSD menu
• Temperature sensor for monitoring the internal temperature (I²C)
• Infrared remote control
• Access code to OSD menu: 4-digit password freely definable
• OSD menu in all languages / characters e.g. Arabic, Chinese, French, Greek, Japanese, Cyrillic, Turkish
• Elektronic lense (selected "window" zoomed on output resolution)
• OSD menu slider in any custom design
• PrismaRemoteControl software for serial control of basic functions, please contact us if interested
  • compatible for Windows7 64bit O/S, WIN8 and WIN10
  • Brightness
  • Contrast
  • Signal source
  • Display mode 16:9 or 4:3 or fill
• white balance and alignment for video- / splitwalls
• adjustment of color and gamma values according to your requirements
  • Color Calibration: sRGB tone mappings for white points D65 and D50

Using the new MarsRover software enables the end user to set several parameters and to configure the Prisma-IIIE according to their requirements.