PrismaMediaECO-II

Our PrismaMediaECO-II is a competitive, space-saving and efficient multimedia card. It controls TFT displays from VGA (640x480) up to WUXGA (1920x1200) via LVDS. The board is based on the MSrat Graphics Chip and is 100% backward compatible to PrismaMEDIA-Eco

Features:

• 12V and 24V Vcc
• HDMI 1.3 (compatible with HDMI 1.4)
• DVI (via HDMI)
• Display Port 1.2a
• VGA
• Option: USB-B (e.g. for firmware update, remote brightness control etc.)
• Indiviual configuration of each input interface
• Remote OSD via serial command protokoll at RS232-UART interface
• DDC/CI functions at DP- and HDMI auxiliary channel
• Modern EMI-design
• Perfectly designed for power-on-sequencing and PWM-control of TFT displays with LED backlight
• HDMI/DP/VGA bridge
• Fan connection 12V 4-pin

PrismaMediaECO-II enables the end user to set different parameters using the new MStarRover software.

 
Options:

• Remote OSD via serial command protocol at USB interface (additional COM port)
• infrared remote control
• 2x5W active stereo audio & headphone 3.5 TRS connector
• ambient light sensor for automatic brightness control (I²C)
• Temperature sensor for monitoring the internal temperature (I²C)
• Frozen screen sensor for detecting image failure or frozen image (I²C) 

Audio performance:

• THD+N Total harmonic distortion + noise at PO = 1 W: < 0.2 %
• Channel equality: < 1 dB
• Crosstalk at PO = 0.25 W, f = 1 kHz: < -82 dB
• SNR Signal-to-noise ratio at PO = 5 W, f = 1 kHz: < -105 dB