The visible bezel of a maximum of 5.7mm between two monitors practically does not affect the image on the video wall and can be taken into account via the monitor’s OSD menu to create a homogenous image without any effects of distortion. You can set it up either via OSD keypad, via RS232 interface with the “Wall Express” software or via an optionally available infrared remote control.

Thanks to the HDMI 2.0 or DisplayPort 1.4 input, the Full HD monitor can be provided with a high-resolution UHD image, which allows you to achieve a lossless display on a video wall of 2×2 devices. In addition, the next monitor can be supplied with an image via the HDMI daisy chain output. Thus, you only need one image source for the entire video wall.

The VESA 100×100 interface on the back of the VideoWall Monitor enables you to attach your own PC or video player and the required cables with cable ties neatly to the back of the monitors on the available tabs. This ensures you always have a tidy and professional installation that is easy to maintain.

During production all VideoWall monitors are calibrated to a uniform white point (D65) and uniform brightness. Thus we guarantee a homogenous picture for video walls without having to carry out a complex calibration of each monitor after installation.

The 46″ FHD VideoWall monitor enables a perfect video wall installation, a quick and easy monitor setup and a great image playback for stand-alone or video wall use.

Please click here for more information about the VideoWall monitor.