Can a 5 to 10.1 Inch Touch Display Work Like a Standard HDMI Monitor?
April 29, 2020
Yes. Our plug-and-play HDMI display modules in 5, 7 and 10.1 inches have the TFT controller board built in, so they connect to an HDMI output for video and a USB port for touch, using the supplied cables, and run like a standard monitor. Each has an integrated 5-point PCAP touchscreen for keyboardless operation. We supply them from Ronkonkoma, New York, for OEMs who need a small touch display without designing the controller side themselves.
What are the specifications of each module?
Four modules cover the three sizes, all with 5-point PCAP touch and an HDMI video input:
| Module | Size | Resolution | Brightness | Viewing angle | Operating temperature | Depth |
|---|---|---|---|---|---|---|
| DLC0500AFM18HT-C-1 | 5″ | 800 x 480 | 350 cd/m² | Best from 12 o’clock | -20 to +70°C | 7.28 mm |
| DLC0700XDP21HF-C-1 | 7″ | 1024 x 600 | 350 cd/m² | IPS, 85° all directions | -20 to +70°C | 7.95 mm |
| DLC1010BBP30HF-C-1 | 10.1″ | 1280 x 800 | 300 cd/m² | IPS, 85° all directions | -10 to +60°C | 4.9 mm |
| DLC1010BBP39HF-C-2 | 10.1″ | 1280 x 800 | 300 cd/m² | IPS, 85° all directions | -20 to +70°C | 4.5 mm |
The 5-inch and 7-inch modules run from -20 to +70°C (-4 to +158°F). For a 10.1-inch display that needs the same range, the DLC1010BBP39HF-C-2 is the choice, with a higher contrast ratio of 800:1. On the 7-inch and both 10.1-inch modules, IPS technology keeps content readable from the side, which matters when the screen is mounted where operators approach it at an angle. Datasheets and dimension drawings are on each product page.
Where do HDMI touch modules fit best?
Where a design needs a small, cost-effective touch display and already has an HDMI output and a USB port, such as an embedded computer or a single-board computer driving a control panel. Their main advantage is price-performance: no controller board to select, configure or mount, and no panel timing to work out. They are part of our Compact Panels series, alongside ultra-slim open-frame panels from 10.1 to 31.5 inches.
What if the application needs more than a standard module?
Then the display becomes a custom assembly. When a device needs higher brightness, a wider temperature range or a protective cover glass, we build the display assembly to the requirement, with optical bonding of the glass and touchscreen to the panel, a custom bezel or housing, and the controller to suit. Through the FORTEC Group, we can also take a customized design into volume production.
Tell us the size and where the display has to work, and we will take it from there. We recommend a standard module or a custom assembly, supply it with the cables, and stay with the project from first samples to series production, backed by our technical services.









