
DDP520 Power Supply: 340 W Without a Fan in a 3 x 5-Inch Footprint
November 16, 2026
By Mike Pizzirusso, Director of Business Development, FORTEC US
The Inission DDP520 is an open frame AC/DC power supply that delivers 340 W with natural convection and 460 W with forced air in a 3 x 5-inch footprint. It reaches up to 94.5% efficiency and is made by Inission Power, one of the manufacturers we supply, and it belongs with our AC/DC power supplies. The DDP520 product page and the datasheet list the full specifications.
I have spent more than 40 years in the electronics industry, much of that time as a field applications engineer. What I have learned is that the best power supply is rarely the one with the highest wattage rating. The better question is how much usable power the system can deliver within the real-world limits of space, airflow, temperature, EMC, and reliability.
That is where the DDP520 becomes interesting.
Can a 3 x 5-Inch Power Supply Deliver 340 W Without a Fan?
Yes, the DDP520 is rated at 340 W with natural convection at inputs above 90 VAC, on the 24 and 48 VDC open frame models. The rating rises with line voltage, and more than 600 LFM of forced airflow takes the series to 460 W. The series fits the industry-standard 3 x 5-inch footprint and is about 1.5 inches high.
Natural convection ratings by input voltage, from the datasheet (Rev 04, Apr 2026). With more than 600 LFM of forced air, all models reach 460 W:
| DDP520 model | >90 VAC | >100 VAC | >180 VAC |
|---|---|---|---|
| US24-OF | 340 W | 360 W | 415 W |
| US48-OF | 340 W | 360 W | 460 W |
| US56-OF | 350 W | 370 W | 460 W |
| -PC models | 310 W | 340 W | 390 W |
US24, US48, and US56 are the 24, 48, and 56 VDC models. The -PC models are the protective cage option, and their natural convection ratings are lower. Ratings depend on input voltage, output voltage, and ambient temperature, so check the datasheet’s derating curves against the enclosure. Inission also lists 12 and 36 VDC variants as available upon business case evaluation, with ratings still to be confirmed.
For me, one of the most important specifications is the 340 W free-air rating. Fans are sometimes unavoidable, but they bring noise, dust, maintenance, and mechanical wear, and a fan is one more component that eventually wears out. If the system can eliminate the fan, it can simplify the mechanical and thermal design while potentially improving long-term reliability.
The datasheet also lists a 520 W peak for up to 10 seconds. That can matter in applications with motors, pumps, lighting loads, or other systems where startup or transient loads are substantially higher than steady-state consumption.
High Efficiency Makes Thermal Design Easier
At these power levels, efficiency is a thermal specification as well as an energy one. With efficiency up to 94.5%, the DDP520 produces less heat inside the enclosure, and that heat is what the system designer ultimately has to remove.
That matters most when the goal is a compact, closed, or low-airflow product. Every watt that doesn’t become heat is a watt the system designer doesn’t have to remove. The supply also accepts a wide 90 to 305 VAC input, so one design suits a broad range of worldwide installations.
More Than Just Main Output Power
Another feature I like is that the design provides system-level functionality rather than simply converting AC to DC. Standard outputs are 24, 48, and 56 VDC, with a 5 V / 1 A standby output. Power Good, Remote On/Off, and remote sense signals are also available.
Those features can simplify the overall system architecture and give the equipment designer more control over sequencing, standby operation, and voltage regulation at the load.
Designed for Real Industrial Applications
The DDP520 is certified to IEC/EN/UL 62368-1 3rd edition for audio/video and information technology equipment. The datasheet also lists CSA, CB, and CE approvals and RoHS 3 compliance. It says the series is designed to meet UL 8750 for LED lighting and IEC/EN/UL/CSA 61010-1 2nd edition.
It operates over -40 to 70 °C ambient, with output derating above 50 °C. It is compatible with operation at altitudes up to 5,000 meters, with power derating above 1,800 meters. Protection includes slow-blow fuses on both AC lines, input undervoltage lockout, overcurrent, short-circuit, overvoltage, and overtemperature protection.
These aren’t glamorous specifications, but in my experience they are the ones that become important when a product moves from the engineering bench into production and field deployment.
Where I Would Look at the DDP520
I see the DDP520 fitting particularly well in applications such as:
- Industrial automation and controls
- Industrial laser equipment
- 3D printers
- Automated teller and self-service equipment
- Digital signage and video walls
- LED and architectural lighting
- Entertainment lighting, moving heads, and strobes
- Telecommunications and communications equipment
Lists like this are examples, not limits. Inission’s datasheet also names laboratory and analysis equipment, test and measurement equipment, and air and water treatment systems. Tell us what the application is, and we will work out which supply fits it and the enclosure it has to live in.
DDP520 FAQs
What airflow does the DDP520 need for 460 W?
More than 600 LFM. At that airflow the datasheet lists no derating up to 50 °C ambient. The natural convection ratings follow the derating curves in the datasheet instead.
How big and heavy is the DDP520?
The open frame model measures 76.2 x 127.0 x 38.5 mm (3.00 x 5.00 x 1.51 in) and weighs 400 g (0.88 lb). AC input is on a JST connector, DC output is on two M4 screw terminals, and the control signals share an 8-pin connector.
Does the DDP520 have power factor correction?
Yes. It has active PFC and complies with EN 61000-3-2 Class C above 20% load. Input surge current is limited to under 20 A.
How much power does the DDP520 use on standby?
Under 0.35 W. The 5 V / 1 A standby output stays on when Remote On/Off switches the main output off.
What warranty does the DDP520 have?
Five years. The datasheet lists a five-year warranty from Inission Power.
The Bottom Line
What stands out to me about the DDP520 isn’t one individual specification. It is the combination. For engineers trying to increase power density without automatically adding more fans, more enclosure volume, and more thermal complexity, that combination deserves a serious look.
After four decades of working with power and electronic systems, I continue to come back to the same principle. The best power supply is the one that makes the overall system easier to design, build, and support. The DDP520 is a very good example of that philosophy.
Considering the DDP520 for a new design? Send us the output voltage and power the system needs, the AC input it will see, and the airflow and ambient temperature inside the enclosure. We will check the DDP520 against those requirements with you and supply it. If the system needs more than 520 W, see Inission’s 1,200 W HDP1200. If it also needs a display or an embedded computer, we supply those too, as one integrated system. Email us at info@fortec.us.
Product photo: Inission Power

Which PCAP Touchscreen Construction Fits Your Design: Glass/Glass, Glass/Film, or Film/Film?
November 4, 2026

Which Industries Does FORTEC US Serve?
November 3, 2026

Bringing AI to the Point of Care: Does Your Next Medical Device Need an NPU?
November 2, 2026

What Does the FORTEC Group Mean for US Customers?
October 30, 2026

Is FORTEC US a Distributor? What a Value-Added Display Supplier Does
October 29, 2026

Who Is FORTEC US?
October 28, 2026


